Fix It

Troubleshooting Center

Pick the symptom you are seeing. Each flow runs from the safest check to the deepest fix — stop as soon as the problem is solved.

DM TECH never runs commands on your PC. Every command here is reference text you copy and run yourself, in a window you control. Read what a command does before running it, and back up important data first.

PC will not start or boot

Startup

Work from power and firmware outward before touching Windows itself.

  1. Step 1. Confirm power

    Check the cable, wall socket and power supply switch. On laptops, hold the power button for 15 seconds, reconnect the charger and try again.

  2. Step 2. Look for firmware activity

    If the manufacturer logo never appears, the problem is hardware or firmware — not Windows.

  3. Step 3. Disconnect everything non-essential

    Remove USB drives, docks, external disks and secondary monitors, then retry.

  4. Step 4. Check the boot device

    Enter BIOS/UEFI and confirm the Windows drive is detected and first in the boot order.

  5. Step 5. Run Startup Repair

    Boot from Windows installation media, choose Repair your computer, then Startup Repair.

  6. Step 6. Rebuild boot data as a last resort

    From the recovery Command Prompt only.

    bootrec /rebuildbcd

Stop here if: The drive is not detected in BIOS/UEFI — that is a hardware fault, and further software repair will not help.

Windows feels slow or unresponsive

Performance

Measure first, then remove real causes instead of applying tweaks blindly.

  1. Step 1. Find the bottleneck

    Open Task Manager and watch CPU, memory and disk while the slowdown happens. Note which one sits near 100%.

  2. Step 2. Audit startup apps

    Task Manager > Startup apps. Disable anything you do not need at sign-in.

  3. Step 3. Free disk space

    A nearly full system drive slows everything down.

    cleanmgr
  4. Step 4. Update storage and chipset drivers

    Old storage drivers are a frequent cause of stalls on laptops.

  5. Step 5. Check drive health

    Confirm every volume reports Healthy.

    Get-Volume
  6. Step 6. Repair system files if instability accompanies the slowdown

    sfc /scannow

Connected but no internet access

Network

Test each layer in order: adapter, local network, routing, then name resolution.

  1. Step 1. Check the adapter

    Confirm the adapter has a valid IP and gateway.

    ipconfig /all
  2. Step 2. Test the local network

    Ping the gateway address shown above. Failure here means a router or cabling problem.

  3. Step 3. Test routing

    Ping a public IP address.

    ping -n 10 1.1.1.1
  4. Step 4. Test DNS

    If the IP replies but names fail, DNS is the problem.

    nslookup example.com 1.1.1.1
  5. Step 5. Clear the resolver cache

    ipconfig /flushdns
  6. Step 6. Reset the stack and restart

    Only when the earlier steps did not resolve it.

    netsh winsock reset && netsh int ip reset

Stop here if: Other devices on the same network also fail — the problem is the router or the internet service, not this PC.

Wi-Fi keeps disconnecting

Network

Usually power management, driver or profile related.

  1. Step 1. Turn off adapter power saving

    Device Manager > network adapter > Properties > Power Management, clear the option that lets Windows turn the device off.

  2. Step 2. Update the wireless driver

    Get it from the laptop or adapter manufacturer, not a driver-pack utility.

  3. Step 3. Forget and rejoin the network

    Removes a stale saved profile.

    netsh wlan show profiles
  4. Step 4. Test on a different band

    Connect to the 5 GHz or 2.4 GHz band specifically to identify interference or range problems.

Black screen after sign-in

Display

Distinguish a display output problem from an Explorer shell problem.

  1. Step 1. Test the shell

    Press Ctrl + Shift + Esc. If Task Manager appears, Windows is running and the shell failed.

  2. Step 2. Restart Explorer

    In Task Manager, find Windows Explorer and choose Restart.

  3. Step 3. Cycle the display output

    Press Windows + Ctrl + Shift + B to reset the graphics driver, or Windows + P to change output.

  4. Step 4. Boot into Safe Mode

    If the screen is fine in Safe Mode, a graphics driver or startup app is the cause.

  5. Step 5. Roll back the graphics driver

    Device Manager > Display adapters > Properties > Driver > Roll Back Driver.

No sound from speakers or headphones

Audio

Check the output device first — most cases are the wrong device selected.

  1. Step 1. Confirm the output device

    Click the volume icon and pick the correct playback device.

  2. Step 2. Check per-app volume

    Settings > System > Sound > Volume mixer.

  3. Step 3. Run the audio troubleshooter

    Settings > System > Troubleshoot > Other troubleshooters > Audio.

  4. Step 4. Restart the audio service

    net stop audiosrv && net start audiosrv
  5. Step 5. Reinstall the audio driver

    Device Manager > Sound, video and game controllers > uninstall device, then restart.

USB device not recognised

Peripherals

Separate a device fault from a port or driver fault.

  1. Step 1. Try another port and another PC

    This immediately tells you whether the device or the PC is at fault.

  2. Step 2. Check Device Manager

    Look for an Unknown device or a yellow warning icon.

  3. Step 3. Turn off USB selective suspend

    Control Panel > Power Options > advanced settings > USB settings.

  4. Step 4. Reinstall USB controllers

    Uninstall the USB Root Hub entries in Device Manager and restart — Windows reinstalls them.

Windows Update keeps failing

Updates

Clear the cache, repair components, then retry.

  1. Step 1. Note the error code

    The code narrows the cause considerably — look it up in the DM TECH error code library.

  2. Step 2. Run the Windows Update troubleshooter

    Settings > System > Troubleshoot > Other troubleshooters.

  3. Step 3. Stop the update services

    net stop wuauserv && net stop bits
  4. Step 4. Rename the cache folder

    Rename C:\Windows\SoftwareDistribution to SoftwareDistribution.old, then start the services again.

  5. Step 5. Repair the component store

    DISM /Online /Cleanup-Image /RestoreHealth
  6. Step 6. Retry the update and restart

Random crashes or blue screens

Performance

Collect evidence before changing anything.

  1. Step 1. Record the stop code

    Photograph or write down the stop code shown on the blue screen.

  2. Step 2. Check Event Viewer

    Windows Logs > System, filtered to Critical and Error around the crash time.

  3. Step 3. Test memory

    mdsched
  4. Step 4. Repair system files

    sfc /scannow
  5. Step 5. Undo recent changes

    Roll back drivers or updates installed shortly before the crashes began.

Printer will not print

Peripherals

Clear the queue and restart the spooler before reinstalling anything.

  1. Step 1. Check the printer state

    Confirm it is online, has paper and is not paused in Settings > Bluetooth & devices > Printers.

  2. Step 2. Restart the print spooler

    net stop spooler && net start spooler
  3. Step 3. Clear stuck jobs

    Open the print queue and cancel everything, then retry a single test page.

  4. Step 4. Reinstall the printer

    Remove the device and add it again so Windows fetches a fresh driver.